990 Mobile Micro GC System
The Agilent 990 Mobile Micro GC provides fast and accurate results in minutes. This gas chromatograph is fully configurable with up to four channels for analyzing gas samples on the go, with lab-quality results.
The 990 Mobile Micro GC is best deployed directly at the sample location. It eliminates sampling processing, sample transport, and wait time, and provides answers immediately, where they matter most. It has a very durable field case with integrated dual carrier gas, and the on-board power supply allows the 990 Mobile Micro GC to deliver data for up to two working days before recharging, making it the perfect solution for field monitoring.
The 990 Mobile Micro GC offers:
- Much lower power and carrier gas consumption compared to conventional GCs
- Less material waste due to smaller size and advanced technology
- Reduced shipping distances
- Sustainable, recycled product and packaging content
- End-of-life take-back incentives to ensure proper recycling
Additional Information
Manufacturing Impact Reduction
The Shanghai, China facility that manufactures Agilent 990 Micro GC Systems for the US, EU, and UK markets has implemented initiatives to reduce its energy and water consumption within the last 5 years. These initiatives include vacuum capacity improvement projects, implementing off-peak demand reduction initiatives, and installing RO and DI water treatment systems at the facility to reuse water on-site.
Renewable Energy Use
The Shanghai, China facility that manufactures Agilent 990 Micro GC Systems for the US, EU, and UK markets utilizes a solar photovoltaic system to produce renewable energy. The solar panels have an estimated annual offset of 269 tonnes of CO2e.
Responsible Chemical Management
The Shanghai, China facility that manufactures the Agilent 990 Micro GC Systems has implemented robust EMS policies including ISO 14001 certification. Additionally, the Agilent 990 Micro GC Systems do not utilize any chemicals of concern and are Eu RoHS compliant.
Shipping Impact
The Agilent 990 Micro GC Systems are manufactured in Shanghai, China. For the US market, the systems are distributed via Agilent's distribution center in Memphis, TN. For the EU and UK markets, the Agilent systems are distributed via Agilent's Waghäusel, Germany distribution center.
Product Content
The Agilent 990 Micro GC Systems consist largely of steel containing approximately almost 90% recycled content, aluminum, and electronic components. Therefore, the overall Agilent 990 Micro GC Systems contain greater than 20% sustainable content by weight.
Packaging Content
The Agilent 990 Micro GC Systems' packaging consists largely of a cardboard boxing containing 66% recycled content, EPE foam containing 60% recycled content, and a polyethylene bag. Therefore, the overall Agilent 990 Micro GC Systems' packaging contains greater than 60% sustainable content.
Energy Consumption
The energy consumption of the 990 Micro GC Systems was tested using the following methodology and parameters. It was assumed these units run 24 hours a day.
- Three Channels Utilized
- Column Temperature: 60°C
- Injector Temperature: 110°C
- Sampleline Temperature: 110°C
- Initial Pressure: 150 Kpa
- Inlet Temperature: 80°C
Water Consumption
The Agilent 990 Micro GC Systems do not consume water during the use phase.
Lifetime Rating
The Agilent 990 Micro GC Systems are estimated to have a useable lifetime of 10 years.
Packaging End-of-Life
The Agilent 990 Micro GC Systems' packaging consists largely of a cardboard boxing, EPE foam, a polyethylene bag, and polypropylene board. Across the US, EU, and UK markets the carboard boxing is readily recyclable, while the EPE foam, polyethylene bag, and polypropylene board are recycled, incinerated, or landfilled depending on available infrastructure.
Product End-of-Life
Agilent has an active take-back program for its customers in the EU, UK, and US markets for its 990 Micro GC Systems. Furthermore, Agilent encourages its customers to return the product at end-of-life by offering an incentive where the product can be traded-in for a refurbished model, new model, or a cash / credit balance.
Innovative Practices
The Agilent 990 Micro GC Systems feature electronic pneumatics control (EPC) modules that allow for the use of an alternative carrier gas as opposed to the standard carrier gas, Helium. This has environmental benefits as helium is considered a non-renewable resource. Furthermore, the use of MEMS and Chip Based Detectors reduces gas consumption, material use, and space use.