G1820-65541 | Basic LC-ICP-MS connection kit for speciation analysis using HPLC-ICP-MS | 1 Kit | 926.00 USD | |
---|
Basic LC-ICP-MS connection kit for speciation analysis using HPLC-ICP-MS. Includes PFA sample tubing, 0.3 mm id, 1.6 mm od, 3 m, 2 unions, PEEK fittings 1/16 inch x 10-32 male nut, 3 x 2/pk, APG remote cable, gender changer connector D9S-FF |
G1833-65200 | Comprehensive LC-ICP-MS connection kit for speciation analysis using HPLC-ICP-MS | 1 Kit | 1,455.00 USD | |
---|
Comprehensive LC-ICP-MS connection kit for speciation analysis using HPLC-ICP-MS. Suitable for LC-ICP-MS applications other than Cr in water and As in water/urine. This is a comprehensive pack of tubing and connectors required to set up LC-ICP-MS. Includes sample tubing (PFA, 0.15 mm id, 0.7 m, 5/pk; PTFE, 0.8 mm id, 0.5 m; PTFE, 2.0 mm id, 5 m); peristaltic pump tubing, Tygon, 3-stop, 0.89 mm id, 12/pk; T-joint, 2/pk; union joint, 5/pk; PTFE nut for 3 mm od tubing, 10/pk; front and back ferrules for 3 mm od tubing, 10/pk; PTFE nut for 1.6 mm od tubing, 10/pk; front and back ferrules for 1.6 mm od tubing, 10/pk; peri-pump tubing adapters, 2/pk; APG remote cable; gender changer connector D9S-FF; manual/setup guide |
G3280-80603 | Spray chamber, single-pass, suitable for capillary LC interface and very low-flow sample introduction applications | 1 Each | 1,516.00 USD | |
---|
G3280-80602 | Total consumption nebulizer, suits capillary LC interface kit used with Agilent ICP-MS | 1 Each | 5,018.00 USD | |
---|