ICP-MS Sample Loops
ICP-MS sample loops are used in conjunction with a switching valve, to fill and hold a fixed sample volume for analysis. The loop is filled during the rinse cycle, improving sample throughput and reducing component wear with high matrix samples.
ICP-MS sample loops for AVS MS (formerly ISIS 3) and ADS 2 are available in a range of sizes to suit your specific application needs. AVS sample loops range in volumes from 0.25 mL to 4.00 mL, with two tubing internal diameters, 1.00 mm and 2.18 mm, for high throughput discrete sampling (AVS MS) with ICP-MS. ADS 2 compatible sample loops range in volumes from 0.50 mL to 3.00 mL, with 1.00 mm internal diameters.
Choose the correct loop based on your acquisition time and set up your method parameters using our condition calculator, available in MassHunter 5.3 or above.
ICP-MS sample loops for AVS MS (formerly ISIS 3) and ADS 2 are available in a range of sizes to suit your specific application needs. AVS sample loops range in volumes from 0.25 mL to 4.00 mL, with two tubing internal diameters, 1.00 mm and 2.18 mm, for high throughput discrete sampling (AVS MS) with ICP-MS. ADS 2 compatible sample loops range in volumes from 0.50 mL to 3.00 mL, with 1.00 mm internal diameters.
Choose the correct loop based on your acquisition time and set up your method parameters using our condition calculator, available in MassHunter 5.3 or above.
Product Details
Features
- The AVS MS (formerly ISIS 3) provides simpler operation, higher sample throughput, and improved long-term stability with 7800, 7850, 7900, and 8900 ICP-MS
- For use with the AVS MS: Easy-fit loops with 1.00 mm or 2.18 mm id tubing, and volumes ranging from 0.25 mL to 4.00 mL
- Our standard loop, 1.50 mL with 1.00 mm id tubing (p/n 5005-0425), is included with the preconfigured kit of standard fittings for the AVS MS
- The ADS 2 autodilution system with ICP-MS provides increased productivity by automating calibration standard preparation from one or more stock solutions, as well as prescriptive and reactive dilution on samples.
- For use with the ADS 2: Easy-fit loops with 1.00 mm id tubing and volumes ranging from 0.50 mL to 3.00 mL
