This set contains firmware files for all Agilent LC modules and corresponding documents. Revision changes are documented in the included Firmware Bulletin

All firmware revisions A.06.02-06/B.01.02-06 and below are zipped as complete sets. In case you require one of these older revisions for use with old control software, download the required ZIP-file.

Upgrade ALL existing modules modules to latest version only if

• a new LC module is added to the existing system (recommended)
• one of the existing modules requires an upgrade due to a bug fix solved with the latest release.

For firmware update procedures/tools refer to the Tools & Procedures.

This set includes just the latest firmware of each module. It's fully compatible with your CDS that supports this firmware set.

Agilent LC Firmware Set Interoperability and Support Statement:

• Agilent releases LC firmware updates as so-called "firmware sets".
• All Agilent LC instrument firmware sets have been designed and tested to be truly and strictly backward compatible to the installed software base (CDS)
• The module firmware contained in each set is fully compatible and interoperable with all other module firmware of the same set.
• Agilent recommends using always the latest module firmware revision of a firmware set in order to avoid interoperability issues.
• Generally, Agilent recommends keeping the LC instrument firmware always current.
• Do not mix firmware revisions between different sets. Agilent does not guarantee mixed firmware revisions from older or newer sets.
• If you have to document the firmware revision (for validation reasons) please use the term "Revision XXX or later" or "Firmware from Set XXX or later". This might help on discussions in case of required updates due to malfunctions that have been corrected in later releases.

Notes for Agilent LC instruments controlled by non-Agilent Chromatography Data Systems (CDS):

• The 3rd-party CDS software vendor is responsible for compatibility testing with the respective CDS revision.
• The 3rd-party CDS software vendor defines the minimum firmware revision required for CDS compatibility.
• The 3rd-party CDS release notes issued by the respective CDS vendor may use different terminology for the firmware requirements such as "tested firmware", "supported firmware", "firmware requirements", "minimum tested firmware", etc.
• An Agilent LC instrument running a current firmware set is fully supported as long as it meets or exceeds the minimum firmware requirements specified by the 3rd-party CDS software vendor and meets Agilent's firmware set/firmware interoperability requirements.

1200 Compatibility and Emulation Mode

OQ/PV after FW upgrade

Download Information

(Versions included, sorted by revisions)